866.684.7325   

FracDart™

FracDart

CLICK HERE FOR PRINTABLE VERSION

The Peak Completions’ FracDart™ Frac Plug is an all-composite body frac plug for temporary zonal isolation in both vertical and horizontal wells. The plug uses our proprietary MPS™ Slip Technology and can be deployed on wireline or tubing using conventional pump-down methods.

Once set, the large inner diameter hollow core remains open to allow wireline operators to continue work above. A ball is then dropped from the surface and pumped down until it seats on the tool. Once the ball is seated, the operator can pressure up against the plug, creating zonal isolation. Using Peak’s patent-pending technology, our engineers are able to use the absolute minimum amount of material, maximize the ID and use 70% of the required volume of composite material compared to all competitor’s composite plugs.

The FracDart™ features a patent-pending design and our proprietary MPS™ Slip Design. MPS™ stands for Managed Particle Size and is a novel convention in slip design, eliminating large slip components and reducing the risk of sticking a drill out BHA. Our MPS™ technology combined with our extensive experience and expertise provides a smooth, quick drill out using either conventional tubing or coiled tubing.

PRODUCT HIGHLIGHTS

  • All Composite Construction with MPS™ Slip Technology
  • Compact size provides easy installation and minimizes total material
  • Anti-preset setting equipment prevents plug from setting while running in the hole
  • Allows flowback from below the plug through Large ID compared to standard frac plugs
  • Drill out times of 5 - 10 minutes or less
  • Less than 15” Overall Length in set position
  • 500+% more flow area through large ID than comparable composite frac plugs
  • Large Inner Diameters help to aid in cleanup of screen outs
  • Better Ball Action during frac jobs due to reduction of pressure drop through ID when displacing frac ball to seat
  • Peak’s Most Economical Design
  • Bulk Delivery Discounts Available

 

TECHNICAL SPECIFICATIONS

CASING OD OVERALL LENGTH CASING WEIGHT TOOL ID

TOOL OD

BALL DROP SIZE

OPERATING RANGE

SETTING TOOL

4 ½” 17.13" 10.5-11.6# 1.500" 3.656" 1.750" 7.5K psi / 350° F Baker #10 / 3½” GO
4 ½” 17.13" 11.6-13.5# 1.500" 3.656" 1.750" 7.5K psi / 350° F Baker #10 / 3½” GO
4 ½” 17.13" 13.5-15.1# 1.500" 3.531" 1.750" 7.5K psi / 350° F Baker #10 / 3½” GO
5” 17.13" 15.0-18.0# 1.625" 4.000" 1.875" 7.5K psi / 350° F Baker #10 / 3½” GO
5” 17.13" 18.0-21.4# 1.625" 3.875" 1.875" 7.5K psi / 350° F Baker #10 / 3½” GO
5 ½” 18.38" 15.5-17.0# 2.375" 4.625" 2.625" 7.5K psi / 350° F Baker #20 / 3½” GO
5 ½” 18.38" 17.0-20.0# 2.375" 4.500" 2.625" 7.5K psi / 350° F Baker #20 / 3½” GO
5 ½” 18.38" 20.0-23.0# 2.375" 4.375" 2.625" 7.5K psi / 350° F Baker #20 / 3½” GO

SETTING ADAPTER KIT

The FracDart™ is set with a universal setting sleeve and shear sleeve adapter. The setting kits can be run on any wireline setting tool or tubing run hydraulic setting tool with either Baker #10, Baker #20 or 3½ GO connections. The tool’s antipreset design keeps plug from setting while running in hole.