866.684.7325   

Slimhole Set-A-Seat™

2094-55B-Set-A-Seat

CLICK HERE TO VIEW ANIMATION

CLICK HERE FOR PRINTABLE VERSION

The Slimhole Set-A-Seat™ is a revolutionary pump-down baffle that leaves the largest ID possible in the casing for optimum flowback. Unlike a standard Set-A-Seat™, the Slimhole version covers a range of casing weights and its reduced OD allows for more flexible installation and better tool diameter to inner casing diameter clearance. Still offering the largest ID available in a fully drillable package, the Slimhole Set-A-Seat™ is truly a game changer.

The tool is used with Peak’s proprietary line of Fantom® dissolvable frac balls and eliminates the need to mill out after treatment. The Slimhole Set-A-Seat™ allows a minimally restricted flowback ofthe reservoir and wellbore, as well as full 10,000 psidifferential between stages.

The Slimhole Set-A-Seat™ isolates the stage above it by using a large OD dissolvable frac ball placed where the conventional composite plug would normally be. Once the ball is dissolved, the tapered front and back ends allow for conventional coiled tubing clean out tools to be run in and out of the tool without fear of hanging up or having to switch to slim hole BHA configurations.

The tool is made out of the same drillable, erosion-resistant material as our frac seats. This gives operators the opportunity to mill out if necessary since it is completely drillable and contains less than 35% of the material by volume compared to a conventional composite plug - 10 lbs of iron, compared to 24 lbs of composite by weight for 5.5” tools.

PRODUCT HIGHLIGHTS

  • Largest ID possible in casing for flowback
  • Contains less than 35% material by volume than composite plug
  • Eliminates the need for mill outs after treatment
  • Ability for full 10,000 psi bottom-hole differential pressure between stages
  • Isolates the stage above with large OD dissolvable frac ball

DESIGN FEATURES

  • Reduced OD compared to Standard Set-A-Seat™
  • Tapered leading and trailing edges for coiled tubing clean out
  • Made out of drillable materials for easy mill out
  • Utilizes a high bypass area
  • Dual anti-preset design

TECHNICAL SPECIFICATIONS

 

PRODUCT NUMBER SIZE WEIGHT RANGE OD IMPERIAL OD METRIC ID IMPERIAL ID METRIC OVERALL LENGTH LENGTH METRIC
2094-35A-A00 3.5" 9.2# 2.656 in 67.5 mm 1.65 in 42.1 mm 14.63 in  37.2 cm
2094-45A-A00 4.5" 9.5# - 10.5# 3.781 in 93.7 mm 2.781 in 68.3 mm 14.63 in 37.2 cm 
2094-45B-A00 4.5" 10.5# - 11.6# 3.750 in 92.9 mm 2.750 in 67.5 mm 14.63 in 37.2 cm 
2094-45C-A00 4.5" 11.6# - 13.5# 3.656 in 92.1 mm 2.656 in 66.7 mm 14.63 in 37.2 cm 
2094-45D-A00 4.5" 13.5# - 15.1# 3.563 in 89.7 mm 2.563 in 64.3 mm 14.63 in 37.2 cm 
2094-45E-A00 4.5" 15.1# - 16.6# 3.438 in 87.3 mm 2.438 in 61.9 mm 14.63 in 37.2 cm 
2094-50A-A00 5" 15# - 18# 4.000 in 101.6 mm 3.000 in 76.2 mm 14.63 in 37.2 cm 
2094-50B-A00 5" 18# - 21.4# 3.875 in 98.4 mm 2.875 in 73.0 mm 14.63 in 37.2 cm 
2094-50C-A00 5" 21.4# - 23.2# 3.750 in 95.3 mm 2.750 in 69.9 mm 14.63 in 37.2 cm 
2094-55A-A00 5.5" 15.5# - 17# 4.625 in 117.5 mm 3.625 in 92.1 mm 14.63 in 37.2 cm 
2094-55B-A00 5.5" 17# - 20# 4.500 in 114.3 mm 3.500 in 88.9 mm 14.63 in 37.2 cm 
2094-55C-A00 5.5" 20# - 23# 4.375 in 111.1 mm 3.375 in 85.7 mm 14.63 in 37.2 cm 
2094-55D-A00 5.5" 23# - 26# 4.250 in 108.0 mm 3.250 in 82.6 mm 14.63 in 37.2 cm 
2094-55E-A00 5.5" 26# - 29# 4.125 in 104.8 mm 3.125 in 79.4 mm 14.63 in 37.2 cm