866.684.7325   

Warden™

Warden

CLICK HERE FOR PRINTABLE VERSION

The Peak Completions Warden™ Frac Plug is an all-composite body frac plug for temporary zonal isolation in both vertical and horizontal wells. The Warden™ uses our proprietary MPS™ Slip Technology and can be deployed on wireline or tubing using conventional pump-down methods.

In the Frac plug version, the hollow core remains open to allow wireline pump down work to continue above. A ball is then dropped from the surface and pumped down until it seats on the tool. Once the ball is seated, the operator can pressure up against the plug, creating zonal isolation.

The Warden™ features a patent pending design and our proprietary MPS™ Slip Design. MPS™ stands for Managed Particle Size and is a novel convention in slip design, eliminating large slip components and reducing the risk of sticking a drill out BHA. Our MPS™ technology combined with our extensive experience and expertise provides a smooth, quick drill out using either conventional tubing or coiled tubing.

The Warden™ can also be configured as a caged ball frac plug or bridge plug using a field-adjustable screw-in adapter. If faster pump-down speeds are required, the Warden allows the addition of a pump-down ring.

PRODUCT HIGHLIGHTS

  • All Composite Construction with MPS™ Slip Technology
  • Compact size provides easy installation
  • Anti-preset setting equipment prevents plug from setting while running in the hole
  • Shear sleeve adapter allows ball to be run in place or dropped from surface
  • Allows flowback from below the plug
  • Drill out times of 10 - 15 minutes or less
  • Economical Design and In-House Manufacturing Controls
  • Bulk Delivery Discounts Available

SETTING ADAPTER KIT

The Warden™ is set with a universal setting sleeve and shear sleeve adapter. The setting kits can be run on any wireline setting tool or tubing run hydraulic setting tool with either Baker #10, Baker #20 or 3½ GO connections. The tool’s antipreset design keeps plug from setting while running in hole.

 

 

CASING OD OVERALL LENGTH CASING WEIGHT MIN ID

MAX CASING ID

TOOL OD

BALL DROP SIZE

OPERATING RANGE

SETTING TOOL

4 ½” 20.06" 9.5-13.5# 3.826” 4.090” 3.660” 2.000” 10K psi / 350º F Baker #10 / Owen Compact
4 ½” 20.06" 15.1-17.1# 3.650” 3.826” 3.440” 2.000” 10K psi / 350º F Baker #10 / Owen Compact
5" 20.06" 18-23.2# 3.875" 4.276 3.670" 2.000” 10K psi / 350º F Baker #10 / Owen Compact
5 ½” 20.06" 15.5-23# 4.580” 5.044” 4.370” 2.000” 10K psi / 350º F Baker #20 / Owen Compact
5 ½” 20.06" 23-26# 4.500" 4.700” 4.250” 2.000” 10K psi / 350º F Baker #20 / Owen Compact