866.684.7325   

Tubing Swivel

Tubing Swivel

 

The Tubing Swivel allows surface connections to remain in place while the work string is rotated and moved vertically. It is primarily used in conjunction with the “SST’ to provide a means of operating the by-pass valve while the treating line is connected.

It can also be used to facilitate the operation of other Tryton packers, cementing or for light drilling.

OPERATION

When using this swivel, it is strongly recommended that the treating line be secured to the Tubing Swivel with a suitable safety chain or cable.

 

 

 TUBING O.D. OPERATING
LOAD RATING
EUE THREAD   THREAD
CONNECTION
mm daN mm mm
in lbs in in
73 44,500 79  
2.88   100,000  2.88  50.8
 88.9  60,000  88.9  2
 3.5  135,000  3.5  

Fluid Control Valve #055

 

Fluid Control Valve 055

 

The Type D Control Valve is a pressure-operated, downhole valve that is used to provide control over the displacement of tubing fluids. This valve is actuated by the tubing pressure above the tool. The Type D Control Valve is normally used in conjunction with the selective treating assembly, but may also be used for other applications that require displacement control of tubing fluids.

 

FEATURES:

  • Operates by tubing pressure only
  • Annulus fluid level changes do not effect the valve
  • Durable, metal-to-metal seat
  • Calibrated for accurate field operations
  • Equalizing system to assist in wireline retrieval
  • Tool can be run in place on wireline or if sufficient fluid is present in the tubing, dropped from surface

 

SIZE BODY O.D. NOGO O.D.   FISHING NECK O.D. PULLING TOOL
in mm in mm in mm in mm in mm
2 50.8 1.750 44.5 1.875 47.6 1.375 34.9 2" Camco JDC 2" Ortis RB

 

 

D Fluid Control Valve

 

D Fluid Control Valve

 

PRODUCT 10-134

The D Fluid Control Valve is a pressure actuated valve used to provide surface control over fluid injected into wells with low reservoir pressures by supporting the hydrostatic head in the tubing. The valve may be run in place in the tubing, on wireline, or can be dropped from the surface. The Fluid Control Valve Landing Nipple (Product 10-038) must be run as part of the tubing string.

This valve is usually used in conjunction with the SST or Straddle Packers to provide control of fluid volumes pumped with each setting when selectively acidizing low fluid level wells.

The D Fluid Control Valve operates using Differential Pressures and is not dependent on well depth. This type of valve is much better suited for deep wells than a hydrostatically operated Fluid Control Valve.

The D Fluid Control Valve utilizes specially designed chemical and wear resistant seals to ensure problem-free operation. An extended filter tube is run on this valve to ensure debris cannot get into the valve during pumping operations.

The valve may be dropped from surface, or run and pulled on wireline.

 

SIZE BODY O.D. NOGO O.D.   FISHING NECK O.D. PULLING TOOL
in mm in mm in mm in mm in mm
2 50.8 1.750 44.5 1.875 47.6 1.375 34.9 2" Camco JDC 2" Ortis RB



P631 AS-3 Single Grip Packer

 

P631 AS3 Single Grip Packer

 

The AS-3 Single Grip Packer is designed for wells that do not require a hold-down device when minimal differential  pressure from below the packer is expected. From the packing element down, it is identical to the AS-3 double grip packer and operation is the same. Full opening design allows unrestricted fluid flow and wireline tool movement through the tubing. The AS-3 also incorporates an internal bypass to prevent swabbing when running and retrieving.

FEATURES:

  • Optional setting bottoms
  • Large bypass for running, retrieving and equalizing
  • Right hand compession set, straight pick-up release

SETTING:

Run the tool to setting depth, pick up tubing and rotate to the right ¼ turn at the packer. Tubing weight is applied, which sets the lower slips, closes the bypass valve, and expands the packing elements.

RELEASING:

Raise the tubing, which first opens the bypass valve, then releases the slips and packing elements. The tool can now be moved and reset or pulled form the well.

 

CASING SIZE CASING WEIGHT O.D. OF TOOL NORMAL CASING I.D. RANGE
MIN MAX
in mm lbs kg in mm in mm in mm
2-7/8 73.0 6.4-6.5 9.5-9.6 2.250 57.15 2.375 60.33 2.441 62.00
4 101.6 9.5-11.0 14.1-16.3 3.250 82.55 3.476 88.29 3.548 90.12
4-1/2 114.3 15.1-16.6 22.3-24.6 3.594 91.29 3.754 95.30 3.826 97.18
4-1/2 114.3 9.5-13.5 14.1-20.1 3.450 95.25 3.920 99.57 4.090 103.89
5 127.0 18.0-20.8 26.82-13.9 4.000 101.60 4.156 105.56 4.276 108.61
5 127.0 11.5-15.0 17.1-22.3 4.125 104.78 4.408 111.96 4.560 115.82
5-1/2 139.7 20.0-23.0 29.8-34.2 4.500 114.30 4.670 118.62 4.778 121.36
5-1/2 139.7 14.0-20.0 20.8-29.8 4.625 117.48 4.778 121.36 5.012 127.31
5-1/2 139.7 20.0-23.0 29.8-34.2 4.500 114.30 4.670 118.62 4.778 121.36
5-1/2 139.7 15.5-20.0 23.1-29.8 4.625 117.48 4.718 119.84 4.950 125.73
5-1/2 139.7 13.0-14.0 19.2-20.8 4.813 122.25 5.012 127.31 5.044 128.12
7 177.8 26.0-35.0 38.7-51.8 5.845 149.23 6.004 152.50 6.276 159.41
7 177.8 17.0-26.0 25.3-38.7 6.125 139.70 6.276 114.15 6.538 150.39
7-5/8 193.7 33.7-39.0 50.2-58.1 6.453 163.91 6.625 168.28 6.765 171.83
7-5/8 193.7 24.0-29.7 35.8-44.3 6.672 169.47 6.875 174.63 7.025 178.44
8-5/8 219.1 24.0-40.0 35.8-59.6 7.500 190.50 7.725 196.22 8.097 205.66
9-5/8 244.5 43.5-53.5 64.8-79.7 8.250 209.55 8.525 216.79 8.758 222.45
9-5/8 244.5 32.2-43.5 32.2-48.0 8.500 215.50 8.755 222.38 9.001 228.63

 

 MINIMUM TOOL O.D. THREAD CONNECTIONS PRODUCT NUMBER 
in mm in mm
0.628 15.88 1.050 EU 10RD 26.6 T612-24A-000
1.500 38.10 1.900 EU 10RD 48.2 T631-40A-000
1.500 38.10 1.900 EU 10RD 48.2 T612-41A-000 
1.938 49.23 2.375 EU 10RD 60.3 T631-45A-000
1.938 49.23 2.375 EU 10RD 60.3 T631-52A-000 
1.938 49.23 2.375 EU 10RD 60.3 T631-50A-000
2.000 50.80 2.375 EU 10RD 60.3 T631-57A-000
2.000 50.80 2.375 EU 10RD 60.3 T631-55A-000 
2.375 60.33 1.050 EU 10RD 60.3 T631-59A-000
2.375 60.33 1.050 EU 10RD 73.0 T631-56A-000
2.375 60.33 1.050 EU 10RD 73.0 T631-58A-000
2.500 63.50 1.050 EU 10RD 73.0 T631-70A-000
3.000 76.20 1.050 EU 10RD 73.0 T631-72A-000
2.500 63.50 1.050 EU 10RD 73.0 T631-74A-000
2.500 63.50 1.050 EU 10RD 88.8 T631-75A-000
2.500 63.50 1.050 EU 10RD 73.0 T631-76A-000
4.000 101.60 1.050 EU 10RD 114.2 T631-85A-000
4.000 101.60 1.050 EU 10RD 114.2 T631-96A-000

More Articles ...