866.684.7325   

P218 Pump-Out Cement Sleeve

 

P218 Pumpout Cement Sleeve 

 

The P218 Pump-Out Cementing Sleeve is used for cementing liner strings in the well bore usually run above the P440 Casing Packer.

The P218 Pump-Out Cementing Sleeve is run above the P440 Casing Packer, once the Casing Packer is set (tension or compression) the P218 is activated by gravitating a ball into the lower seat, applied pressure shifts lower seat and opens port holes for cementing. After the cementing operation is completed, pump the wiper plug into the upper seat and apply pressure to shift the closing sleeve over the port holes. Final pressure of 2500 PSI will pump out all internal parts of the P218 Pump-Out Cementing Sleeve.

 FEATURES:

  • No drilling required
  • Short compact design
  • Meets tubing yield strength requirements

 

TUBING SIZE MAX O.D. MIN I.D. @ PUMP-OUT  THREAD CONNECTION PRODUCT NUMBER
in mm in mm in mm in mm
 2.38 60.3 3.125  79.4  2.000  50.80  2.38 EUE 8RD   60.3 T218-20A-000 
2.88  73.0  3.750  95.25  2.500  63.50  2.88 EUE 8RD  733  T218-25A-000 
3.50  88.9  4.500  114.3  3.000  76.20  3.5 EUE 8RD  88.9  T218-35A-000 
4.00  101.6  4.625  117.47  3.453  87.70  4.0 NU 8RD  101.6  T218-40A-000 
4.50  114.3  5.500  139.7  4.000  101.6  4.5 8RD CSG  114.3  T218-45A-000 
5.50  139.7  6.500  165.1  5.000  127.0  5.5 8RD CSG  139.7  T218-55A-000