866.684.7325   

P572 "K" Connector Valve

 

P572 K Connector Valve Bodytop

 

The P572 “K” Connector Valve is a high pressure mechanically operated valve used to convert a double grip retrievable packer to a bridge plug. The P572 “K” Connector design allows pressure to equalize above and below before the packer is released. The running retrieving tool is locked to the valve eliminating accidental separation.

RUNNING:

Run the bridge plug to depth and pick up holding left-hand torque, set down while maintaining left-torque (this will engage j-pin in locked position) and pick up holding left hand torque will release the running retrieving tool from the valve.

RETRIEVING:

Circulate debris from top of Bridge Plug and lower retrieving tool until engaged. Apply right hand torque and pick up allowing pressure to equalize before proceeding with packer release.

 

FEATURES:

  • Equalizes pressure before packer is released
  • Bonded seals for repeated use under pressure
  • Safety dogs eliminate accidental separation
  • Auto jay retrieving tool for easy connecting
  • 10,000 psi pressure rating

 

CASING SIZE CASING WEIGHT TUBING SIZE MAX O.D. RET. TOOL
in mm in mm in mm in mm
4.5 114.3 9.5-13.5 14.1-20.9 2.38 EUE 60.3 3.750  95.25
5 127 11.5-15 17.1-22.3 2.38 EUE 60.3 3.750  95.25
5 127 18-20.8 26.8-31.0 2.38 EUE  60.3 3.750  95.25
5.5 139.7 13-20 19.3-29.8 2.38 EUE 60.3 4.500 114.3
5.5 139.7 20-23 29.8-34.2 2.38 EUE 60.3 4.500 114.3
7 177.8 17-26 25.3-38.7 2.38 EUE 60.3 5.400 137.16
7 177.8 26-32  38.7-47.5 2.38 EUE 60.3 5.400  137.16

 

MIN I.D. RET. TOOL RUNNING TOOL PROD. NUMBER VALVE PROD. NUMBER
in mm
1.750 44.45 T128-45A-000 T129-45A-000
1.750 44.45 T128-45A-000 T129-45A-000
1.750 44.45 T128-45A-000 T129-45A-000
1.750 44.45 T128-55A-000 T129-45A-000
1.750 44.45 T128-55A-000 T129-45A-000
1.750 44.45 T128-70A-000 T129-45A-000
1.750 44.45 T128-70A-000 T129-45A-000