866.684.7325   

P621 32A Tension Squeeze Packer

 

P621 32A Tension Squeeze Packer

 

The P621 32A TENSION SQUEEZE PACKER is a full bore tension set squeeze packer that holds pressure from above and below. The P621 32A is used where sufficient tubing weight is not available to achieve pack off with compression set squeeze packers. The P621 32A is used for squeeze cementing operations casing testing, formation fracturing and high pressure acidizing. The P621 32A is normally run with the P525 SC Unloader which allows circulation around the tool and equalizes tubing and annulus pressures during retrieving.

FEATURES:

  • Full bore design
  • Emergency rotational release system
  • Holds pressure from above and below
  • External J-Slot design reduces debris build up
  • Durable construction

 

 CASING SIZE CASING WEIGHT TUBING SIZE  MAX O.D. MIN I.D. PRODUCT NUMBER
in mm ft/lbs kg/m in mm in mm in mm
4.5 114.3 9.5-13.5 14.1-20.1 2.38 EUE 60.3 3.750 95.25 2.000 50.8 T628-45A-000
127  11.5-15 17.1-22.3 2.38 EUE  60.3 4.125 104.78 2.000 50.8 T628-50A-000
5 127 18-20.8 26.8-31.0 2.38 EUE 60.3 4.000 95.25 2.000 50.8 T628-50B-000
5.5 139.7 13-20 20.7-29.6 2.38 EUE 60.3 4.625 114.30 2.000 50.8 T628-55A-000
5.5 139.7 20.23 29.8-34.2 2.38 EUE 73.0 4.500 114.30 2.375 50.8 T628-55B-000
7 139.7 17-26 25.3-38.7 2.88 EUE 73.0 6.000 114.30 2.375 60.3 T628-70B-000
7 177.8 26-32 38.7-47.6 2.88 EUE 73.0 5.875 149.23 2.500 63.5 T628-70A-000
8.63 219.1 24-40  35.7-59.5 2.88 EUE  73.0 7.500 190.50 2.500 63.5 T628-85A-000