866.684.7325   

Type "S" Stop Turn Anchor

 Type S Stop Turn Anchor

 

The Type "S" Stop Turn Anchor is primarily designed to prevent tubing from backing off or to tighten a string of tubing that has been in the well. It is usually run with positive displacement "screw pumps".

OPERATION:

Set:
The tubing is turned to the right, moving the rocker drag slip and forcing the wicker side of the rocker drag slip into the casing, preventing the tubing from turning.

Release:
The Type "S" Stop Turn Anchor is turned in the opposite direction that was used to set the pump anchor.

FEATURES:

  • Compact, beneficial for gas by-pass
  • Rocker drag slip for setting and releasing control
  • Complete lock system

 

 

CASING
O.D. WEIGHT I.D. RANGE
MIN. MAX.
in mm ft/lbs kg/m in mm in mm
4.5 114.3 9.5-13.5 14.1-20.1 3.92 99.6 4.09 103.9
5.5 139.7 13-20 19.3-29.8 4.778 121.4 5.044 128.1
7 177.8 17-26 25.3-38.7 6.276 159.4 6.538 166.1
8.63 219.0 24-44 35.7-65.5 7.625 193.7 8.191 208.1
9.63 244.5 32-53.5 47.6-79.6 8.435 214.2 9.001 228.6



 ANCHOR O.D. ANCHOR I.D. BORE THREAD CONNECTION
in mm in mm in mm
3.75 95.25 1.933 49 2.375 60.3
4.620 117.0 2.440 62 2.875 73
5.880 149.0 2.440 62 2.875 N/A
7.000 177.8 3.000 76.20 3.500 88.90
8.250 209.6 3.000 76.20 3.500 88.90

P354 RT Anchor Catcher

 P354 RT Anchor Catcher

 

The P354 RT Anchor Catcher was developed to run with a progressive cavity pump on fiberglass tubing string. The unique slip design allows the anchor to grip the casing wall when right-hand rotation is applied and prevents any right handed torque. The RT Anchor Catcher sets to the right, releases to the let or straight pull of the tubing string will engage the adjustable shear safety release mechanism.

FEATURES:

  • Vertically cut wicker slip allows right-hand torque
  • Reduces wear on tubing string
  • Right hand set, left hand release or shear release
  • Parts interchangeable with standard tool
  • Sturdy stainless steel drag springs

 

CASING SIZE CASING WEIGHT MAX O.D.  MIN I.D. TUBING SIZE PRODUCT NUMBER
in mm ft/lbs kg/m in mm in mm in mm
4.5  114.3  9.5-13.5  14.1-20.1  3.750  95.25  2.000  50.8  2.38 EUE 8RD  60.3  T354-45A-000 
5.5  139.7  13-20 19.3-34.2  4.500  114.3  2.000 50.8  2.38 EUE 8RD 60.3  T354-55A-000
5.5  139.7  13-20  19.3-342  4.500  114.3 2.375  63.5  2.88 EUE 8RD  73  T354-56A-000
7 177.8 17-35 25.3-52.08 5.875 149.2 2.500 63.5 2.88 EUE 8RD 76 T354-70A-000
177.8  17-35 25.3-52.08  5.875  149.2  2.500  50.8 2.88 EUE 8RD 60.3 T354-71A-000



P312 H/D Tubing Anchor Catcher

 P312 HD Tubing Anchor Catcher

 

The P312 H/D Tubing Anchor Catcher is a heavy-duty, rotationally activated tool used to prevent vertical movement of the tubing string. The H/D Anchor uses drag blocks in place of friction springs allowing for better torque resistance and longevity. The H/D Anchor sets to the left, releases to the right or can be shear released with an easily adjustable shear release system. The H/D Anchor can also be special ordered for right hand set (left hand release) with Team Torque slips allowing the tool to be with progressive cavity pumps.

FEATURES:

  • Drag block design for durability and torque
  • Easily adjustable shear release mechanism
  • Full-bore design
  • Available in right hand set for PCP applications

 

CASING SIZE CASING WEIGHT MAX O.D.  MIN I.D. TUBING SIZE PRODUCT NUMBER
in mm ft/lbs kg/m in mm in mm in mm
4.5  114.3  9.5-13.5  14.1-20.1  3.750  95.25  50.8  2.38 EU  60.3  T312-45A-000 
127  11.5-15  17.1-22.3 4.000  101.6  50.8  2.38 EU  60.3  T312-50A-000
127  18-20.8  26.8-31  4.125  104.77  50.8  2.38 EU  60.3  T312-51A-000
5.5  139.7  13-20  19.3-29.8  4.625  117.47  50.8  2.38 EU  60.3 T312-55A-000
5.5  139.7  20-23  29.8-34.2  4.500  114.3  50.8  2.38 EU  60.3  T312-55B-000
5.5  139.7  13-20  19.3-29.8  4.625  117.47  2.5  63.5  2.88  73  T312-56A-000
5.5  139.7  20-23  29.8-34.2  4.500  114.3  2.5  63.5  2.88  73  T312-56B-000
177.8  17-38  25.3-56.5  5.750  146.1  2.5  63.5  2.88  73  T312-70A-000



Drag Block Type Anchor Catcher #008-01

 Drag Block Type Anchor Catcher 008-01

 

The Drag Block Anchor Catcher is a reliable, retrievable, double grip anchor catcher.

APPLICATIONS:

Anchor the tubing string in tension or compression in wells of any depth. This prevents movement of the tubing string during pumping operation, thus increasing pump efficiency and decreasing rod wear.

FEATURES:

  • Fully retrievable
  • Released by right-hand rotation or optional left-hand
  • Drag blocks for setting and releasing control
  • Emergency shear release, each pin is 5,000 lbs. shear
  • The Slips are completely retracted once the Anchor Catcher has been sheared, allowing the tubing to move up or down. This feature eliminates potential damage to the Anchor Catcher, tubing or casing.

Drag Block Type "A" Anchor Catcher #058

 Drag Block Type A Anchor Catcher 058

8-⅝-9-⅝ 219.8mm - 244.4mm Large By-pass

The Drag Block Anchor Catcher is a reliable, retrievable, double grip anchor catcher.

APPLICATIONS:

Anchor the tubing string in tension or compression in wells of any depth. This prevents movement of the tubing string during pumping operation, thus increasing pump efficiency and decreasing rod wear. This Anchor Catcher may also be used for progressive cavity pumps to prevent rotation or, tubing strings from dropping due to tubing failure.

FEATURES:

  • Fully retrievable
  • Released by right-hand rotation or optional left-hand
  • Drag blocks for setting and releasing control
  • Emergency shear release, each pin is 5,000 lbs. shear
  • When the anchor catcher has been sheared the slips are completely retracted, permitting the slips to move up or down thus eliminating potential damage to the anchor catcher, tubing or casing

 

CASING ANCHOR
O.D. WEIGHT MAX SUP TRAVEL
in mm ft/lbs kg/m in mm
8.63 219.08 24-44 35.71-65.47  8.29 210.56
9.63 244.48 65.30-58 48.06-86.30 9.26 235.20

 

ANCHOR
BODY MAX O.D. MANDREL I.D. STED. EUE BOX PIN PRODUCT NUMBER
6.75 3.00 3.50 058-858
171.45 76.20 88.90 058-958

More Articles ...