The Model A Pump-Out-Plug Assembly is used below a production packer or tailpipe. The assembly holds pressure from below and unseats with a predetermined amount of tubing pressure.
| MAX O.D. | MIN I.D. | THREAD CONNECTION | PRODUCT NUMBER |
| in | mm | in | mm | in | mm |
| 2.200 | 55.88 | 1.250 | 31.75 | 1.660 EUE | 42.2 | Aluminum |
| 2.500 | 63.5 | 1.500 | 38.10 | 1.900 EUE | 48.3 | Aluminum |
| 3.063 | 77.8 | 2.000 | 50.80 | 2.38 EUE | 60.3 | Aluminum |
| 3.750 | 95.25 | 2.500 | 63.50 | 2.88 EUE | 73 | Aluminum |
| 4.500 | 114.3 | 3.000 | 76.20 | 3.5 EUE | 88.9 | Aluminum |
The Model AR Pump-Out-Plug Assembly is used below a production packer or tailpipe. The assembly holds pressure from below and unseats with a predetermined amount of tubing pressure. The AR Pump-Out-Plug Assembly is recommended when running into lines or highly deviated wells.
| MAX O.D. | MIN I.D. | THREAD CONNECTION | PRODUCT NUMBER |
| in | mm | in | mm | in | mm |
| 2.200 | 55.88 | 1.250 | 31.75 | 1.660 EUE | 42.2 | Aluminum |
| 2.500 | 63.5 | 1.500 | 38.10 | 1.900 EUE | 48.3 | Aluminum |
| 3.063 | 77.8 | 2.000 | 50.80 | 2.38 EUE | 60.3 | Aluminum |
| 3.750 | 95.25 | 2.500 | 63.50 | 2.88 EUE | 73 | Aluminum |
| 4.500 | 114.3 | 3.000 | 76.20 | 3.5 EUE | 88.9 | Aluminum |
The Model ES Pump-Out-Plug Assembly is used below a production packer to test tubing integrity or to activate a hydraulic set packer. The Model ES allows fluid flow form both directions until a 1-3/8* Diameter ball is gravitated down into the landing seat. Pressure applied to tubing string will shear out ball and seat at a predetermined pressure rating. * Other Ball Sizes are available.
| MAX O.D. | SEAT I.D. | THREAD CONNECTION | PRODUCT NUMBER |
| in | mm | in | mm | in | mm |
| 3.250 | 82.55 | 1.000 | 2.500 | 2.38 EUE | 60.3 | Aluminum |
| 4.250 | 107.95 | 1.187 | 3.000 | 2.88 EUE | 73 | Aluminum |
| 4.500 | 114.3 | 1.187 | 3.175 | 3.5 EUE | 88.9 | Aluminum |
Contact A Sales Representative
